Vitesse Racing Mass Air Flow system for the Porsche 944 Turbo.
The kit includes the following items:
Two Vitesse proprietary “Chip Boards” that substitutes for the Bosch Motroic DME 28-pin EE-Prom.
Two MAP (Manifold Absolute Pressure) sensors.
One MAF sensor
Four Siemens Deka 80 lb/hr fuel injectors
The necessary documentation, pipe, and hoses to install the MAF system.
$700
The buyer pays for shipping.
944 Turbo Vitesse Racing Mass Air Flow System
- Add Pictures/Files
-
- MAF.jpg (2.06 MiB) Viewed 2040 times
-
- MAF 2.jpg (1.61 MiB) Viewed 2040 times
-
- MAP.jpg (1.55 MiB) Viewed 2040 times
-
- Chipboards.jpg (1.36 MiB) Viewed 2040 times
-
- Injectors.jpg (1.18 MiB) Viewed 2040 times
Last edited by MXK944 on Fri Jul 26, 2024 5:14 am, edited 3 times in total.
-
Black944 turbo
- Posts: 206
- Joined: Thu Jul 14, 2022 7:45 am
- Has thanked: 10 times
- Been thanked: 122 times
What turbo is this setup for?
- Tom
- Site Admin
- Posts: 8827
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 913 times
- Been thanked: 3901 times
- Contact:
That's cheap! GLWS! @Fast951 can school us all on it, but in my experience, his MAF kits are mapped primarily to the injectors, not the turbocharger per se. I've switched turbos several times without touching the chip-board or tune. With his piggyback, you can optimize for boost levels, etc., but right out of the box his kit will work well with a wide range of turbos.
- BigRatchet
- Posts: 15
- Joined: Fri Dec 22, 2023 11:50 pm
- Location: Omaha, Nebraska
- Has thanked: 4 times
- Been thanked: 2 times
Check PM !
- Tom
- Site Admin
- Posts: 8827
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 913 times
- Been thanked: 3901 times
- Contact:
It bears witness to a life well lived.