Carpokes Porsche Forum

Hello everyone,

I’ve been lurking in the background for quite a while and really enjoying all the great posts and information shared on this forum. I figured it’s about time for my first contribution and to give something back to the community.

I designed jack pad adapters for the Macan, and I’m sharing two versions here.

• 5 mm bottom pad

  Porsche_Macan_Jack_Pad_5mm.stl

  Macan 5 mm jack pad adapter stl

  (303.3 KiB) Downloaded 3 times

• 15 mm bottom pad

  Porsche Macan Jack Pad_15mm.stl

  Macan 15 mm jack pad adapter stl

  (304.18 KiB) Downloaded 7 times

I’ve been using the 5 mm version on my 2017 Macan GTS several times now and it works great. However, I realized that having a little more clearance to the chassis would be nice, so I created a 15 mm version as well. That one is currently being printed and not yet tested.

My final parts are printed in TPU 95A HF, but my initial prototype was printed in PETG — and surprisingly, it worked perfectly and held up for multiple uses.

Print settings for TPU 95A HF:

• Top & Bottom Layers: 7

• Walls/Perimeters: 6

• Infill: 90%